All Listings

MondoClad

This listing is not verified by the manufacturer. It is the user's responsibility to review the product brochures and technical notes related to the information presented in this listing and ensure alignment with these resources. If you identify any inconsistencies, errors, or intellectual property issues, please email us at [email protected].
Expansion after installation
dexp = 1 mm
Contraction after installation
dcon = 1 mm
Joint width for sealant movement
wseal = 1 mm
Minimum joint width
wmin = 1 mm
MondoClad thermal movement and joint width

Estimates the thermal movement of a 3 mm MondoClad solid aluminium panel and the joint width needed to accommodate it. The MondoClad fixing system drawings state that joint widths vary to suit panel size and the sealant used. This calculator gives a first estimate of that width.

Linear thermal expansion is taken as 2.4 mm/m at a 100 °C temperature difference, from the MondoClad Fabrication Guide V2 and Brochure V6.

Not Available
Not Available
Not Available
Not Available

Basis and limits

  • Preliminary sizing only. Joint and fixing details must be confirmed by a suitably qualified professional for the project.
  • Each joint is assumed to take the movement of one panel length, which applies when adjacent panels are the same length and each is restrained at one point.
  • Panel surface temperatures are the designer's assumption. HVG Facades does not publish surface temperatures by colour.
  • The 12 mm minimum construction joint is from the MondoClad Designer Specification, Fixed Watertight Cassette Panel System, April 2026, clause 2.
  • Sealant movement capacity must be taken from the sealant manufacturer's data. The sealant manufacturer may also set a minimum joint width and depth.
  • Not included: movement of the substructure and building, fabrication and installation tolerances, and the plus or minus 1.0 mm fold allowance in the Fabrication Guide.