All Listings

MondoClad

This listing is not verified by the manufacturer. It is the user's responsibility to review the product brochures and technical notes related to the information presented in this listing and ensure alignment with these resources. If you identify any inconsistencies, errors, or intellectual property issues, please email us at [email protected].
Blank width
bw = 0 mm
Blank height
bh = 0 mm
Best stock sheet (mm)
Sheet = 0
Blanks per sheet
n = 0
Sheets required
Ns = 0
Material yield (%)
Y = 0
Sheet mass
m = 0 kg
MondoClad cassette blank and sheet yield

Works out the flat blank for a folded MondoClad cassette, how many blanks each stock sheet size yields, and which stock sheet needs the least material for the quantity entered.

Stock sheet sizes are from the MondoClad National Range list, May 2026. Painted weight is 8.31 kg/m2, from the MondoClad Designer Specification, April 2026.

Basis and limits

  • Preliminary take-off only. Confirm blank sizes against the fabricator's shop drawings before ordering.
  • Blank size is taken as the face size plus the return depth on each edge. The Fabrication Guide notes that 90 degree routed folds may vary by plus or minus 1.0 mm, which is to be compensated for in the panel size calculations. That allowance is not applied here.
  • Blanks are laid out as a simple grid in one orientation. Mixed orientations and nesting of different panel sizes are not considered.
  • The best stock sheet is the one needing the least sheet area. Not every colour is stocked in every sheet size: check the National Range list before specifying.
  • The minimum return bend of 20 mm is from the MondoClad Designer Specification, April 2026, clause 5.2.
  • Corner notches, stiffeners, extrusions and fixings are not included in the mass.