Slab Post Tensioning
This listing contains design data for the SRG Global Slab Post-Tensioning System. it includes the following:
- Strand properties
- Wire properties
- Maximum jacking forces - recommended values
- Prestressing losses - typical data
- Live end anchorage dimensions
- Dead end anchorage dimensions
- Coupling anchorage dimensions
- Anchorage reinforcement
- Suggested allowances for strand offsets for 19mm flat duct
- Jacking clearances
- Surface recessed stressing pan dimensions
Tendon Wobble ß
k = 1 rad/m
The table is not uploaded or the values for the variables: Strand Properties Standard, Strand name tag do not match table records.
The table is not uploaded or the values for the variables: do not match table records.
The table is not uploaded or the values for the variables: do not match table records.
The table is not uploaded or the values for the variables: do not match table records.
The table is not uploaded or the values for the variables: do not match table records.
The table is not uploaded or the values for the variables: do not match table records.
The table is not uploaded or the values for the variables: Strand nominal dia (mm) do not match table records.
Figure:
Dead end anchorage
The table is not uploaded or the values for the variables: Strand nominal dia (mm), Dead end type do not match table records.
The table is not uploaded or the values for the variables: Strand nominal dia (mm), Anchorage reinforcement do not match table records.
Figure:
Strand offsets for 19mm flat duct
The table is not uploaded or the values for the variables: do not match table records.
Figure:
Single ram jack
The table is not uploaded or the values for the variables: do not match table records.
Figure:
Surface recessed stressing pan
