Bartek BPS Stud Insert

The Bartek BPS Insert is a footed stud with a BPS female coupler swaged to the end that accepts a BPS male starter bar to form a connection between pours in concrete structures. Predominately used between core walls and floor slabs. They can also be used in the connection of precast wall panels to concrete floors.

Rebar Tensile Capacity

ØN_u_,_r_b = 1 kN

Pull-out Capacity

ØN_u_,_p = 1 kN

Concrete Cone Capacity

ØN_u_,_c = 1 kN

Stud arrangement

Anchor Dimensions

The table is not uploaded or the values for the variables: Installation Type do not match table records.

Rebar Tensile Capacity, ØN_u_,_r_b, Ø = 0.85

Rebar Specifications and Sizes

The table is not uploaded or the values for the variables: do not match table records.

Rebar Tensile Capacity ØN_u_,_r_b, Ø = 0.85

Not Available

Anchor pull-out capacity, ØN_u_,_p, Ø = 0.6

The characteristic resistance of an anchor in pull-out failure calculated in accordance with AS3850.1:2024, clause B.3.2.2.

Not Available

Tensile resistance in the case of concrete cone failure, ØN_u_,_C, Ø = 0.6

Basic characteristic tensile resistance, N_u_,_C_,_�_�

Characteristic resistance for a single cast-in insert placed at a minimum distance of 1.5h_e_f from any edge. Calculated in accordance with AS3850.1:2024, clause B.3.2.3.1

Not Available

Calculation of A⁰_c_,_N

The projected concrete failure area of a single anchor idealised as a rectilinear pyramid of height h_e_f and base length 3h_e_f with an edge distance greater than 1.5h_e_f. Refer to AS3850.1:2024, clause B.3.2.3.1 and figure B.4.

Not Available

Calculation of A_c_,_N

The table is not uploaded or the values for the variables: Single or Multiple Anchors do not match table records.

Calculation of C_i

The table is not uploaded or the values for the variables: Single or Multiple Anchors do not match table records.

Calculation of ØN_u_,_C, Ø = 0.6

Characteristic tensile resistance of the selected anchor in the case of concrete cone failure. Refer to AS3850.1:2024, clause B.3.2.3.1.

Not Available