All Listings
Post-tensioning Kits
Flat anchor code
1
Wedge block code
1
Compatible wedges code
1
Safe Stressing – Mono-strand Post-tensioning
Stressing should only be carried out by experienced personnel who have been assessed as competent to operate stressing equipment and have acquired knowledge of all safety requirements necessary during the stressing operation. Refer to the Post Tensioning Institute of Australia's (PTIA) Guidance Note GN03/v.1 for further guidance.
Flat anchor and wedge block
Flat anchor dimensions
The table is not uploaded or the values for the variables: do not match table records.
Wedge block and compatible wedges
The table is not uploaded or the values for the variables: Wedge block material do not match table records.
Recess Dimensions
Figure
The table is not uploaded or the values for the variables: do not match table records.
Anchorage Reinforcement
Figure:
Spiral type anchorage reinforcement
The table is not uploaded or the values for the variables: do not match table records.
Jacking clearances
Figure:
Jacking clearances for a single ram jack
The table is not uploaded or the values for the variables: do not match table records.